Coal chemical-Shanghai Yanzheng Experimental Instrument Co., Ltd.

Shanghai Yanzheng Experimental Instrument Co., Ltd.

Shanghai Yanzheng Experimental Instrument Co., Ltd.

Shanghai Yanzheng Experimental Instrument Co., Ltd.

Reactor Expert

All

All
Product Management
News
Introduction
Enterprise outlets
FAQ
Enterprise Video
Enterprise Atlas

Search

Coal chemical

About petroglyphs

Coal chemical

Environmental protection

Home page

Coal chemical

Automatic hydrogenator

The design temperature is 500 degrees and the design pressure is 20MPa. the closed-loop control optimization of the weighing module in the feeding system ensures the inaccuracy of HPLC high-pressure feeding. the overall volume of the system is less than 100ml, and safe hydrogenation is carried out. the discharge is equipped with a 1ml quantitative ring to collect fresh samples. the design of the gas-liquid separation volume module <10ml is realized with an automatic drain valve. No pressure fluctuation, high pressure automatic discharge, system pressure automatic control, the whole system configuration sequence control workflow software, to achieve fully automatic process 24h unattended

Consult
Interface Reaction System for Preparation of Ultra-low Temperature Visual Semiconductor Electronic Grade Products

It is a special equipment used for the key process steps in the preparation of semiconductor electronic grade products. The system uses ultra-low temperature technology and visual interface reaction technology, which can be precisely controlled and monitored at extremely low temperatures to ensure the high quality and stability of the preparation process

Consult
R134a Disassembly Unit

The design pressure temperature is 650 ℃ @ 25MPa, the working pressure is 10~20 MPa, and the working temperature is 300~600 ℃. The device includes an air intake module, a liquid intake module, a preheating module, a reaction module, a condensation separation module and an automatic pressure control module. A sieve plate with adjustable position is installed at the lower part of the reactor, which can not only adjust the catalyst loading, but also make the catalyst more fully contact with the catalyst on the sieve plate. Through this device, the effects of temperature, pressure, space velocity, catalyst performance, catalyst particle size and other factors on the reaction can be investigated.

Consult
Wet steel corrosion fatigue test platform

The wet steel corrosion fatigue test platform is mainly used to study the carbonization oxidation corrosion process of steel slag. The device has 310S reaction kettle, electric heating reaction furnace. The device mainly has a feed unit, a reaction unit, and a tail gas treatment unit. The design temperature of the reactor of the device is 600 degrees Celsius, and the design pressure is 3 MPa. The overall level of the device requires a high degree of automation, good data accuracy and repeatability, safety and reliability, and long-cycle stable operation.

Consult
Hydrogen fluoride defluorination skid-mounted unit

Mainly used for raw gas defluorination treatment, molecular sieve performance evaluation, molecular sieve regeneration, optimization of reaction conditions and other aspects of research, in the laboratory conditions to simulate the industrial defluorination process, so as to obtain the best process operating conditions, in order to obtain the reaction parameters under small-scale test conditions, technical guidance for industrial production. The material of the reactor is Inconel 600, the design pressure is 0.5MPa, the service pressure is 0.1MPa, the design temperature is 300 ℃, and the service temperature is 80~200 ℃. The exterior of the device is designed with carbon steel paint, the top is designed with rain cover and surrounding sealing plates, which can prevent dust and rain. Pipelines and cables are connected through plate joint or Glen joint. The interior of the frame is designed with acrylic plate separation. Electrical components, feed gas inlet unit, reactor unit and detection unit are respectively located in different areas to improve experimental safety and reduce gas diffusion between units to a certain extent in case of leakage.

Consult

Shanghai Yanzheng Experimental Instrument Co., Ltd.

Shanghai Yanzheng Experimental Instrument Co., Ltd.

Shanghai Yanzheng Experimental Instrument Co., Ltd.

Shanghai Yanzheng Experimental Instrument Co., Ltd.

Shanghai Yanzheng Experimental Instrument Co., Ltd.

Shanghai Yanzheng Experimental Instrument Co., Ltd.

Headquarters Factory: No. 101-102, Lane 666, Xianing Road, Jinshan District, Shanghai

Telephone:021-55077056

E-mail:yly@yanzheng17.com

Shanghai Yanzheng Experimental Instrument Co., Ltd.

Sweep and add WeChat
Online consultation

CopyRight©2024 Yanzheng instrument all rights reserved

Business License

Power By:www.300.cn SEO

Shanghai Yanzheng Experimental Instrument Co., Ltd.

Shanghai Yanzheng Experimental Instrument Co., Ltd.

Shanghai Yanzheng Experimental Instrument Co., Ltd.

Shanghai Yanzheng Experimental Instrument Co., Ltd.

Shanghai Yanzheng Experimental Instrument Co., Ltd.

上海岩征实验仪器有限公司

Telephone

Shanghai Yanzheng Experimental Instrument Co., Ltd.

400-920-1718