Multifunctional Photoelectric Synergistic Catalytic Reactor

The photoelectrochemical high‑pressure reactor manufactured by Shanghai Yanzheng leverages the synergistic effects of photon and electron to enhance the catalytic activity of photocatalytic materials. By immobilizing the catalyst on a conductive substrate and applying an external bias voltage to suppress the recombination of photogenerated electrons and holes, a new technology has been developed—electrochemically assisted photocatalysis, also known as photoelectrocatalysis. This approach effectively promotes the separation of photogenerated electrons and holes and utilizes the synergistic interplay between light and electricity to boost photocatalytic oxidation. When a photocatalyst is used as the photoanode and subjected to a specific bias voltage, photogenerated electrons migrate to the external circuit, thereby inhibiting electron–hole recombination. Meanwhile, holes accumulate on the catalyst’s surface, further enhancing the catalyst’s activity.

Classification:

High‑pressure reactor

Special Reactor

Telephone:

Product Description

Details

Technical parameters

Product Description
Technical parameters
Product Details Chart

Details

Name	Multifunctional Photoelectric Synergistic Catalytic Reactor
Opening and closing method	KF Quick-Release Type
Sealing Method	Self‑sealing O‑ring
Heat Transfer Method	Electric heating
Heating power	1200W
Design temperature	250℃
Operating temperature	50–200°C (up to 80°C when used for electrocatalysis)
Temperature control accuracy	±1℃ (in the absence of significant heat release or absorption)
Design pressure	150bar
Burst pressure	125bar
Use pressure	≤100 bar (Note 1)
Standard Material	316L (Note 2)
Stirring power	80W
Stirring speed	150–1500 rpm
Operating System	YZ-MRCTR
Note 1	When using negative pressure, special instructions must be provided; a separate negative pressure gauge should be installed, and the negative pressure sensor should be replaced.
Note 2	Special materials such as Hastelloy, Monel alloy, zirconium, Inconel, and titanium are available for custom orders.

Product Description
Technical parameters
Product Details Chart

技术参数

Name	Multifunctional Photoelectric Synergistic Catalytic Reactor
Opening and closing method	KF Quick-Release Type
Sealing Method	Self‑sealing O‑ring
Heat Transfer Method	Electric heating
Heating power	1200W
Design temperature	250℃
Operating temperature	50–200°C (up to 80°C when used for electrocatalysis)
Temperature control accuracy	±1℃ (in the absence of significant heat release or absorption)
Design pressure	150bar
Burst pressure	125bar
Use pressure	≤100 bar (Note 1)
Standard Material	316L (Note 2)
Stirring power	80W
Stirring speed	150–1500 rpm
Operating System	YZ-MRCTR
Note 1	When using negative pressure, special instructions must be provided; a separate negative pressure gauge should be installed, and the negative pressure sensor should be replaced.
Note 2	Special materials such as Hastelloy, Monel alloy, zirconium, Inconel, and titanium are available for custom orders.